Morning y’all, don’t mind me … between what feels like two-full time jobs and 5-7 hours a day in the harsh sticky heat of the South I find myself jiving my inner Bill Nye the Science Guy.
It’s been a couple weeks since I last posted photos of the project’s progression from gently rolling weed-filled acres to a proper horse pasture. Now I’ll be straight with you, since I’ve still only access to our battery operated …you heard that right… push mower, it is still very much weed-filled acres, even higher than when we started however. (Lookin’ at you, rain!) BUT…all four sides have every third post set and concreted in place, all the corners posts are concreted in as well as our pasture access gate posts.
Now before I get too excited, as pictures can be quite deceiving, for maximum strength and lowest strain placed upon each individual post, we elected to space our posts 10′ apart. So right now, every 30′ there is a post. So it looks like we’re ready to attach fasteners and start unrolling the CenFlex but alas… I’ve still a solid 60 posts to set and backfill with our gravel/sand mixture.
Now that…THAT in itself is the right bugger of this project. On average once loaded up with backfill our wheelbarrow weighs about 50-60lbs. Hauling this up and down a 4 acre hill is a terrifyingly spectacular thing to witness…at least when I’m the one doing it. A few trips ‘down’ and I start envisioning myself just tipping over or the wheelbarrow tire going flat. A dozen trips ‘down’ and I start to imagine sitting on top and magically riding it down and squealing to a stop just before the post hole. Like I said, I spend a lot of time in the sun doing a simple but very tedious task over and over and over. Your mind starts to wander.
…to be continued.